Member Login | Register
Navigation
  • Home
  • Blog
  • Forums
  • FAQ
Home : All Forums : Hardware : APU
Recent Posts My Posts My Subscriptions

APU2 not booting and lights on ethernet ports flashing

Subscribe New Topic Reply
  • QuoteRate
    My Posts

    Posts: 1
    Karun - Posted Jul 23rd

    Hello,

    I have a APU2 and when i connect it to the power to start, I dont see anything from the console and the led lights on the ethernet ports appear to flash constantly.

    What would the problem be?

  • QuoteRate
    My Posts

    Posts: 14
    miczyg - Posted Sep 8th
    Hello Karun.

    Network Controller light can lit with just power supply connected. Platform should boot right after plugging DC cable and print messages on COM1. If it is not doping so, probably firmware is corrupted. If You have a SPI flash recovery dongle, You could just connect it to SPI header and boot platform. If even this solution will not help, I would suspect hardware defect on electrical level. I assume You have nothing connected to apu except serial cable and DC cable.

    Post last edited Sep 8th
Subscribe

Rules: