Yesterday something weird happened to my ultra reliable WRAP box running PFSense for many years now perfectly :)
The lights went off, not sure when, and didn't have time to check it out then as I had to go out. When I was out I tried remoting in (thought maybe it came back on) unfortunately nothing.
When I got home, I thought maybe the adaptor was loose or something (even tho left untouched for ages), so I pushed on the adaptor into the power board and it came back on for about 20 mins and then died again. Now when I push and prod on the adaptor the lights came on momentarily, sometimes for about 10 secs if I keep holding and pushing adaptor. Pressing on the dc jack into the box does nothing, that seems tight. Tried on a different power board, same deal. The adaptor is KTEC 18v 1A output. I did have another 9V adaptor handy which I tried but nothing, maybe because it wasn't enough power anyway (hope I didn't stuff the box anyway..). The box is basically fixed to the wall with some hard putty, but if I must I will dislodge and take a look inside. Yesterday when I said it worked for 20mins before losing power, everything as far as networking worked perfectly until it lost power.
Thanks for any help!!